|
AppBee-Proto-B Experimenter's Board
The
regulator is rated at 200mA (300 mA MAX momentary) - With the XBee Pro's, additional
components driven from this regulator is NOT recommended.
Order
a bare board or board with parts below (3.3V regulator and surface mount
capacitors
installed and tested with parts).
Power connections:
- Batt - 5 pads for (+)battery or supply
voltage. Must be manually jumpered
to Vin-Reg or for other uses.
- Vss - Battery/supply/board ground or (-)
battery.
- 3.3V - Regulated supply from on board
regulator or end user 3.3V supply/regulator.
- Vin-Reg - Power input to surface mount 3.3V
regulator. 3.6V to 12V.
DigiKey Part
Number
www.digikey.com |
Description |
Qty/Board |
| S5751-10-ND |
CONN
RECEPT 2MM SINGLE STR 10POS |
2 |
| 516-1319-ND |
LED
5MM 565NM GREEN TINT LO PRO |
1 |
| 516-1316-ND |
LED
5MM 635NM HE RED TINT LO PRO |
1 |
| 100QBK-ND |
RES
100 OHM 1/4W 5% CARBON FILM |
2 |
| ADP3330ARTZ3.3-RL7CT-ND |
3.3V
Surface Mount Regulator |
1 |
| 409-3905-1-ND |
10uF
Capacitor - Surface mount |
1 |
| 490-1680-1-ND |
0.47uF
capacitor - Surface mount |
1 |
| WM6036-ND |
CONN
HEADER 36POS .100 R/A TIN
for breadboard header and Prop Plug header. |
14
pins |
| 
