License Agreement

MakerPlot-J Version 1.100 and later

End-User License Agreement (EULA)

END-USER LICENSE AGREEMENT FOR MAKERPLOT-J SOFTWARE

THE SOFTWARE IS OWNED BY SELMAWARE SOLUTIONS, LCC, AN ILLINOIS LIMITED LIABILITY COMPANY (“SELMAWARE”).

THE MAKERPLOT-J END-USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ORGANIZATION) AND SELMAWARE FOR THE MAKERPLOT-J SOFTWARE IDENTIFIED ABOVE WHICH MAY INCLUDE ASSOCIATED SOFTWARE COMPONENTS, VISUAL AND AUDIO MEDIA, PRINTED AND/OR ONLINE DOCUMENTATION ("SOFTWARE").

THE SOFTWARE IS EXCLUSIVELY DISTRIBUTED BY SELMAWARE SOLUTIONS, LLC. AN ILLINOIS COMPANY AND OPERATING UNDER THE WEBSITE URL WWW.MAKERPLOT-J.COM.  SELMAWARE MAY ENLIST OTHER AUTHORIZED RESELLERS FOR EXPANDED DISTRIBUTION OF THE SOFTWARE.

MAKERPLOT-J IS SOFTWARE THAT IS “CUSTOMIZABLE” BY THE END USER AND, AS SUCH, ITS OPERATIONS AND FUNCTIONS MAY NOT “WORK” IN EVERY CASE DUE TO INAPPROPRIATE, INCOMPLETE OR INCORRECT ACTIONS TAKEN BY THE END USER IN SUCH CUSTOMIZING EFFORTS. BECAUSE OF THESE CONDITIONS WE CANNOT WARRANTEE THE SOFTWARE’S FUNCTIONALITY OR ITS USE FOR ANY PURPOSE WHATSOEVER UNDER ANY CIRCUMSTANCES.

THE SOFTWARE IS NOT WARRANTED FOR FITNESS FOR ANY PURPOSE.   USERS OF THE SOFTWARE ASSUME ALL RESPONSIBILITY FOR ITS SAFE AND EFFECTIVE USE.

IMPORTANT - READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE PURCHASE OR CONTINUING WITH A PROGRAM INSTALL OR OPERATION:

By installing, copying, or otherwise using the SOFTWARE, you agree to be bound by the terms of this EULA. This license agreement represents the entire agreement concerning the program between you and SelmaWare, (referred to as "licenser"), and it supersedes any prior proposal, representation, or understanding between the parties. If you do not agree to the terms of this EULA, do not install or use the SOFTWARE.  

The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties.

The SOFTWARE is licensed, not sold.

License Terms

1. GRANT OF LICENSE.

The SOFTWARE is licensed as follows:

(a) Installation and Use.

SelmaWare grants you the right to install and use copies of the SOFTWARE on your computer running a validly licensed copy of the operating system for which the SOFTWARE was designed [Windows 7, Windows 8, Windows 10, Windows 11, MacOS, Linux].

(b) Backup Copies.

You may also make copies of the SOFTWARE as may be necessary for backup and archival purposes.

(c) Current Licenses.

(c1)  Single User License.(Obsolete 4/26/2024, renamed to Standard License)

The MakerPlot-J Single User License allows a single copy of the SOFTWARE REGISTRATION CODE to be installed on and used with only one computer.  The SAME SOFTWARE REGISTRATION CODE cannot be installed on multiple computers under any circumstances.  When multiple copies are necessary, each computer must have a separate MakerPlot-J Single User License SOFTWARE REGISTRATION CODE installed.

(c2)  Standard User License.(Added April 26, 2024)

The MakerPlot-J Standard User License allows a single copy of the SOFTWARE REGISTRATION CODE to be installed on and used with only one computer.  The SAME SOFTWARE REGISTRATION CODE cannot be installed on multiple computers under any circumstances.  When multiple copies are necessary, each computer must have a separate MakerPlot-J Single User License SOFTWARE REGISTRATION CODE installed. The Standard license may be used for home, commercial or in educational institutions or purposes.

(c3)  Personal User License.(Added April 26, 2024)

The MakerPlot-J Personal User License allows a single copy of the SOFTWARE REGISTRATION CODE to be installed on and used with only one computer.  The SAME SOFTWARE REGISTRATION CODE cannot be installed on multiple computers under any circumstances.  When multiple copies are necessary, each computer must have a separate MakerPlot-J Personal User License SOFTWARE REGISTRATION CODE installed. The Personal License may be used only for personal home use or personal educational use at home or personal dwelling. It cannot be used in any business, company, school or institution or for any commercial purposes such as developing commercial or for-profit products or INTERFACES or MACROs for commercial gain. It cannot be used in educational institutions, businesses, schools for profit or not. It cannot be used at home for commercial or for-profit use.

(c4)   Lab Pack License.

The MakerPlot-J Lab Pack License allows multiple copies of the SOFTWARE REGISTRATION CODE to be installed on and used with as many computers, as necessary in an individual classroom, computer lab or office.  You are not permitted to install the SAME MakerPlot-J Lab Pack License REGISTRATION CODE on computers in multiple classrooms, computer labs or offices within the same building or remote branches of the same school, company or business.  A separate MakerPlot-J Lab Pack License REGISTRATION CODE is required for multiple computers in each separate classroom, computer lab or office.

(c5)   Site License.(Added 4/26/2024)

The MakerPlot-J Lab Pack License allows multiple copies of the SOFTWARE REGISTRATION CODE to be installed on and used with as many computers as necessary for a single business, company or institution in a single geographic location.  You are not permitted to install the SAME MakerPlot-J Site License REGISTRATION CODE for a single school, company or business at locations more than 30 miles apart.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

(a) Maintenance of Copyright Notices.

You MUST NOT remove or alter any copyright notices on any and all copies of the SOFTWARE.

(b) Software Distribution.

You MUST NOT distribute registered copies of the SOFTWARE to third parties. Evaluation versions, available for download from MakerPlot-J’s website, may be freely distributed.

(c) Licenses and Registration Codes.

You MUST NOT distribute or make public any license or registration codes issued to you, either through purchase or other means.

(d) Derivative Works - Interface and Macro Distribution

Derivative works created with the SOFTWARE known as INTERFACES and MACROS may be freely distributed.

(e) Prohibition on Reverse Engineering, Decompilation, and Disassembly.

You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

(f) Commercial products using MakerPlot-J software for plotting and other purposes cannot use the free home license for customer use and require permission and fees for the use of the software with their products.

(g) Rental.

You may not rent, lease, or lend the SOFTWARE.

(h) Support Services.

SelmaWare may provide you with support services related to the SOFTWARE ("Support Services"). Any supplemental software code provided to you as part of the Support Services shall be considered part of the SOFTWARE and subject to the terms and conditions of this EULA.

(i) Compliance with Applicable Laws.

You must comply with all applicable laws regarding use of the SOFTWARE.

3. TERMINATION

Without prejudice to any other rights, SelmaWare may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE in your possession.

4. COPYRIGHT

All title, including but not limited to copyrights, in and to the SOFTWARE and any copies thereof is owned by SelmaWare. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not expressly granted are reserved by SelmaWare.

5. NO WARRANTIES

SelmaWare expressly disclaims any warranty for the SOFTWARE. The SOFTWARE is provided 'As Is' without any express or implied warranty of any kind, including but not limited to any warranties of merchantability, no infringement, or fitness of a particular purpose. SelmaWare does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the SOFTWARE. SelmaWare makes no warranties respecting any harm that may be caused by the transmission of a computer virus, worm, time bomb, logic bomb, or other such computer program. SelmaWare further expressly disclaims any warranty or representation to Authorized Users or to any third party.

6. LIMITATION OF LIABILITY

In no event shall SelmaWare, or any authorized MakerPlot-J software reseller, be liable for any damages (including, without limitation, lost profits, business interruption, or lost information) rising out of 'Authorized Users' use of or inability to use the SOFTWARE, even if SelmaWare or software reseller(s) have been advised of the possibility of such damages. In no event will SelmaWare or software reseller(s) be liable for loss of data or for indirect, special, incidental, consequential (including lost profit), or other damages based in contract, tort or otherwise. SelmaWare or software reseller(s) shall have no liability with respect to the content of the SOFTWARE or any part thereof, including but not limited to errors or omissions contained therein, libel, infringements of rights of publicity, privacy, trademark rights, business interruption, personal injury, loss of privacy, moral rights or the disclosure of confidential information.